PSTN+GPRS Network Alarm System

Introduction
◎ Full touch screen glass board panel.
◎ Speech indication for all operation steps, English LCD screen.
◎ 8 electric appliance control,1 wireless siren, 1 wireless doorbell, built-in sound siren.
◎ 2 Center Monitoring Station phone,6 alarm user phone.
◎ Support two-way communication, enable work with 8 dual-way wired keypad, 8 dual-way wireless keypad, 8 dual-way remote.
◎ Support GPRS and TCP/IP protocol, network alarm settings.
◎ Built-in video module, can view video output on line.
◎ Wireless/wired zone status real time monitoring. Wireless detector status real time monitoring.
◎ Tel-line off alarm and Neighbor phone transmit alarm.
◎ 4 group timing arm/disarm setting. Remotely arm, disarm, listen-in function.
◎ Arm/disarm status resume after power off, can choose arm/disarm message report to CMS freely.
◎ 64 event log and inquiry, 10s for recording.
◎ Alarm wireless linkage.
◎ Wireless frequency: 433MHz/868MHz

Technical parameters:
◎ Frequency: 433MHz/868 MHz(optional)
◎ Signal transmit distance: 100 to 150 meters (open area)
◎ Power supply: 12V/500mA(without GSM), 12V/2A(with GSM0
◎ Builtin rechargeable battery:12V/1000mA.
◎ Main machine static current: 50 mA /15V (exclude wire detector current)
◎ Main machine alarming current: <300 mA/15V(exclude high siren current)
◎ Main machine 12V maximum output current: ≤100mA for wired detectors.
◎ Recording time:15s
◎ The trigger delay of wired zones:≧100ms
◎ The method of alarming dial: DTMF GSM
◎ DTMF dial frequency variation:,1.5%
◎ Communication protocol with CMS: Ademco Contact ID.